In-house standards derived from doping peptides: Enzymatic and serum stability and degradation profile of GHRP and GHRH-related peptides.

Matrix effect and sample pretreatment significantly affect the percentage recovery of peptides in biological matrices, affecting the method robustness and accuracy. To counteract this effect, an internal standard (IS) is used; however, in most cases this is not available, which limits the analytical method. It is important to identify short peptides that can be used as ISs in the quantification of peptides in biological matrices. In this study, doping peptides GHRP-4, GHRP-5, GHRP-6, Sermorelin (1-11), Sermorelin (13-20) and Sermorelin (22-29) were synthesized using solid-phase peptide synthesis. Treatment with human blood, trypsin and chymotrypsin was used to determine the stability of the peptides. Products were evaluated using the high-performance liquid chromatography-diode array detector (HPLC-DAD) method. The analytical methodology and sample pretreatment were effective for the analysis of these molecules. A unique profile related to protein binding and enzymatic stability of each peptide was established. GHRP-4, GHRP-6 and Sermorelin (22-29) can be considered as in-house ISs as they were stable to enzyme and blood treatment and can be used for the quantification of peptides in biological samples. Peptides GHRP-6 and Sermorelin (22-29) were used to analyse a dimeric peptide (26 [F] LfcinB (20-30)2 ) in four different matrices to test these peptides as in-house IS.

Combining the Peptide RWQWRWQWR and an Ethanolic Extract of Bidens pilosa Enhances the Activity against Sensitive and Resistant Candida albicans and C. auris Strains.

The antifungal activity of palindromic peptide RWQWRWQWR and its derivatives was evaluated against clinical isolates of Candida albicans and C. auris. Also, Bidens pilosa ethanolic extracts of leaves and stem were evaluated. Furthermore, combinations of peptide, extract, and/or fluconazole (FLC) were evaluated. The cytotoxicity of peptides and extracts in erythrocytes and fibroblasts was determined. The original palindromic peptide, some derivative peptides, and the ethanolic extract of leaves of B. pilosa exhibited the highest activity in some of the strains evaluated. Synergy was obtained between the peptide and the FLC against C. auris 435. The combination of the extract and the original palindromic peptide against C. albicans SC5314, C. auris 435, and C. auris 537 decreased the minimal inhibitory concentrations (MICs) by a factor of between 4 and 16. These mixtures induced changes in cell morphology, such as deformations on the cell surface. The results suggest that the combination of RWQWRWQWR and B. pilosa extract is an alternative for enhancing antifungal activity and decreasing cytotoxicity and costs and should be considered to be a promising strategy for treating diseases caused by Candida spp.

Non-natural amino acids into LfcinB-derived peptides: effect in their (i) proteolytic degradation and (ii) cytotoxic activity against cancer cells.

The dimeric peptide 26[F]: (RRWQWRFKKLG)2-K-Ahx has exhibited a potent cytotoxic effect against breast cancer cell lines, with position 26 (F) being the most relevant for anti-cancer activity. In this investigation, six analogues of the 26[F] peptide were synthesized in which the 26th position was replaced by non-natural hydrophobic amino acids, finding that some modifications increased the resistance to proteolytic degradation exerted by trypsin or pepsin. Additionally, these modifications increased the cytotoxic effect against breast cancer cells and generated cell death mediated by apoptosis pathways, activating caspases 8 and 9, and did not compromise the integrity of the cytoplasmic membrane. Finally, it was found that the modified peptides have a broad spectrum of action, since they also have a cytotoxic effect against the HeLa human cervical cancer cell line. Peptide 26[F] was inoculated in mice by ip administration and the lethal dose 50 (LD50) was between 70 and 140 mg kg-1. While for the 26[1-Nal]: (RRWQWR-1-Nal-KKLG)2-K-Ahx peptide, a dose-response test was performed, and the survival rate was 100%. These results suggested that these peptides are safe in this animal model and could be considered as promissory to develop a treatment against breast cancer.

Peptide-Resorcinarene Conjugates Obtained via Click Chemistry: Synthesis and Antimicrobial Activity.

Antimicrobial resistance (AMR) is one of the top ten threats to public health, as reported by the World Health Organization (WHO). One of the causes of the growing AMR problem is the lack of new therapies and/or treatment agents; consequently, many infectious diseases could become uncontrollable. The need to discover new antimicrobial agents that are alternatives to the existing ones and that allow mitigating this problem has increased, due to the rapid and global expansion of AMR. Within this context, both antimicrobial peptides (AMPs) and cyclic macromolecules, such as resorcinarenes, have been proposed as alternatives to combat AMR. Resorcinarenes present multiple copies of antibacterial compounds in their structure. These conjugate molecules have exhibited antifungal and antibacterial properties and have also been used in anti-inflammatory, antineoplastic, and cardiovascular therapies, as well as being useful in drug and gene delivery systems. In this study, it was proposed to obtain conjugates that contain four copies of AMP sequences over a resorcinarene core. Specifically, obtaining (peptide)4-resorcinarene conjugates derived from LfcinB (20-25): RRWQWR and BF (32-34): RLLR was explored. First, the synthesis routes that allowed obtaining: (a) alkynyl-resorcinarenes and (b) peptides functionalized with the azide group were established. These precursors were used to generate (c) (peptide)4-resorcinarene conjugates by azide-alkyne cycloaddition CuAAC, a kind of click chemistry. Finally, the conjugates' biological activity was evaluated: antimicrobial activity against reference strains and clinical isolates of bacteria and fungi, and the cytotoxic activity over erythrocytes, fibroblast, MCF-7, and HeLa cell lines. Our results allowed establishing a new synthetic route, based on click chemistry, for obtaining macromolecules derived from resorcinarenes functionalized with peptides. Moreover, it was possible to identify promising antimicrobial chimeric molecules that may lead to advances in the development of new therapeutic agents.

Copper(I)-Catalyzed Alkyne-Azide Cycloaddition (CuAAC) "Click" Reaction: A Powerful Tool for Functionalizing Polyhydroxylated Platforms.

Click chemistry is currently one of the most used tools for the generation of complex organic molecules. The advantages of using click chemistry in organic synthesis are remarkable; in many cases, the reactions occur under mild conditions and are free of solvents, with high yields and short reaction times. This makes it an extraordinarily effective and viable alternative for obtaining complex/conjugated molecules. In this review, the use of click chemistry CuAAC is especially emphasized for polyhydroxylated platforms such as resorcinarenes or calixarenes, focusing mainly on aspects of synthesis, specifically conditions, reagents, and methodologies.

Changes in Length and Positive Charge of Palindromic Sequence RWQWRWQWR Enhance Cytotoxic Activity against Breast Cancer Cell Lines.

Breast cancer is one of the main causes of premature death in women; current treatments have low selectivity, generating strong physical and psychological sequelae. The palindromic peptide R-1-R (RWQWRWQWR) has cytotoxic activity against different cell lines derived from cancer and selectivity against noncancerous cells. To determine if changes in the charge/length of this peptide increase its activity, six peptides were obtained by SPPS, three of them with addition of Arg at the N, C-terminal or both and three with deletion of Arg at the N, C-terminal or both. The cytotoxic and selective activities were evaluated against MCF-7, MDA-MB-231, and MCF-12 cell lines and fibroblast primary cell culture, evidencing that the RR-1-R peptide with the inclusion of Arg in the N-terminal end maintained selectivity and increased cytotoxicity against lines derived from breast cancer. The effect of this addition regarding the type of induced cell death was evaluated by flow cytometry, showing very low rates of necrosis and a significant majority of apoptotic events with activation of both Caspase 8 and Caspase 9. This work allowed us to find a modification that generates a peptide with greater cytotoxic effects and can be considered a promising molecule for other approaches to improve anticancer peptides.

Efficient Separation of C-Tetramethylcalix[4]resorcinarene Conformers by Means of Reversed-Phase Solid-Phase Extraction.

A reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed to study the conformer formation generated during the reaction for obtaining C-tetramethylcalix[4]resorcinarene. The chromatographic method was used to design a strategy for purifying the reaction products, using solid-phase extraction columns (RP-SPE) and gradient elution. The chromatographic profiles of the cyclocondensation reaction between resorcinol and acetaldehyde show the presence of three products under the different reaction and precipitation conditions studied. Using RP-SPE, it was possible to enrich the products, which were later characterized by means of RP-HPLC and 1H nuclear magnetic resonance (NMR). This investigation explored and established a new method for RP-HPLC analysis and RP-SPE separation of conformational isomers obtained in the formation reaction of C-tetramethylcalix[4]resorcinarene.

In Vitro Antifungal Activity of Chimeric Peptides Derived from Bovine Lactoferricin and Buforin II against Cryptococcus neoformans var. grubii.

Cryptococcosis is associated with high rates of morbidity and mortality. The limited number of antifungal agents, their toxicity, and the difficulty of these molecules in crossing the blood-brain barrier have made the exploration of new therapeutic candidates against Cryptococcus neoformans a priority task. To optimize the antimicrobial functionality and improve the physicochemical properties of AMPs, chemical strategies include combinations of peptide fragments into one. This study aimed to evaluate the binding of the minimum activity motif of bovine lactoferricin (LfcinB) and buforin II (BFII) against C. neoformans var. grubii. The antifungal activity against these chimeras was evaluated against (i) the reference strain H99, (ii) three Colombian clinical strains, and (iii) eleven mutant strains, with the aim of evaluating the possible antifungal target. We found high activity against these strains, with a MIC between 6.25 and 12.5 µg/mL. Studies were carried out to evaluate the effect of the combination of fluconazole treatments, finding a synergistic effect. Finally, when fibroblast cells were treated with 12.5 µg/mL of the chimeras, a viability of more than 65% was found. The results obtained in this study identify these chimeras as potential antifungal molecules for future therapeutic applications against cryptococcosis.

Chimeric Peptides Derived from Bovine Lactoferricin and Buforin II: Antifungal Activity against Reference Strains and Clinical Isolates of Candida spp.

Antimicrobial peptides (AMPs) are considered to be a valuable source for the identification and/or design of promising candidates for the development of antifungal treatments, since they have advantages such as lower tendency to induce resistance, ease of production, and high purity and safety. Bovine lactoferricin (LfcinB) and buforin II (BFII) are AMPs to which great antimicrobial potential has been attributed. The minimum motives with antimicrobial activity derived from LfcinB and BFII are RRWQWR and RLLR, respectively. Nine chimeras containing the minimum motives of both peptides were synthesized and their antifungal activity against fluconazole (FLC)-sensitive and resistant C. albicans, C. glabrata, and C. auris strains was evaluated. The results showed that peptides C9: (RRWQWR)2K-Ahx-RLLRRRLLR and C6: KKWQWK-Ahx-RLLRRLLR exhibited the greatest antifungal activity against two strains of C. albicans, a FLC-sensitive reference strain and a FLC-resistant clinical isolate; no medically significant results were observed with the other chimeras evaluated (MIC ~200 µg/mL). The chimera C6 was also active against sensitive and resistant strains of C. glabrata and C. auris. The combination of branched polyvalent chimeras together with FLC showed a synergistic effect against C. albicans. In addition to exhibiting antifungal activity against reference strains and clinical isolates of Candida spp., they also showed antibacterial activity against both Gram-positive and Gram-negative bacteria, suggesting that these chimeras exhibit a broad antimicrobial spectrum and can be considered to be promising molecules for therapeutic applications.

Synthetic Peptides in Doping Control: A Powerful Tool for an Analytical Challenge.

Peptides are very diverse molecules that can participate in a wide variety of biological processes. In this way, peptides are attractive for doping, since these molecules can activate or trigger biological processes that can improve the sports performance of athletes. Peptide molecules are found in the official World Anti-Doping Agency lists, mainly in sections S2, S4, and S5. In most cases, these molecules have a very short half-life in the body and/or are identical to natural molecules in the body, making it difficult to analyze them as performance-enhancing drugs. This article reviews the role of peptides in doping, with special emphasis on the peptides used as reference materials, the pretreatment of samples in biological matrices, the instrumentation, and the validation of analytical methodologies for the analysis of peptides used in doping. The growing need to characterize and quantify these molecules, especially in complex biological matrices, has generated the need to search for robust strategies that allow for obtaining sensitive and conclusive results. In this sense, strategies such as solid phase peptide synthesis (SPPS), seeking to obtain specific peptides, metabolites, or isotopically labeled analogs, is a key tool for adequate quantification of different peptide molecules in biological matrices. This, together with the use of optimal methodologies for sample pretreatment (e.g., SPE or protein precipitation), and for subsequent analysis by high-resolution techniques (mainly hyphenated LC-HRMS techniques), have become the preferred instrumentation to meet the analytical challenge involved in the analysis of peptides in complex matrices.

Evidence of Isomerization in the Michael-Type Thiol-Maleimide Addition: Click Reaction between L-Cysteine and 6-Maleimidehexanoic Acid.

The reaction between L-cysteine (Cys) and 6-maleimidohexanoic acid (Mhx) in an aqueous medium at different levels of pH was analyzed via RP-HPLC, finding the presence of two reaction products throughout the evaluated pH range. By means of solid-phase extraction (SPE), it was possible to separate the products and obtain isolated profiles enriched up to 80%. The products were analyzed individually through mass spectrometry, DAD-HPLC, NMR 1H, 13C, and two-dimensional evidence of isomerization between the hydrogen atoms of the α-amino and the thiol group present in the cysteine. Thus, it was concluded that the products obtained corresponded to a mixture of the isomer Cys-S-Mhx, where the adduct is formed by a thioether bond, and the isomer Cys-NH-Mhx, in which the union is driven by the amino group. We consider that the phenomenon of isomerization is an important finding, since it has not previously been reported for this reaction.

Omics in the detection and identification of biosynthetic pathways related to mycotoxin synthesis.

Mycotoxins are secondary metabolites that are known to be toxic to humans and animals. On the other hand, some mycotoxins and their analogues possess antioxidant as well as antitumor properties, which could be relevant in the fields of pharmaceutical analysis and food research. Omics techniques are a group of analytical tools applied in the biological sciences in order to study genes (genomics), mRNA (transcriptomics), proteins (proteomics), and metabolites (metabolomics). Omics have become a vital tool in the field of mycotoxins, especially contributing to the identification of biomarkers with potential use for the detection of mycotoxigenic species and the gathering of information about the biosynthetic pathways of mycotoxins in different environments. This approach has provided tools for the development of prevention strategies and control measures for different mycotoxins. Additionally, research has revealed important information about the impact of global warming and climate change on the prevalence of mycotoxin issues in society. In the context of foodomics, the aim is to apply omics techniques in order to ensure food safety. The objective of the present review is to determine the state of the art regarding the development of analytical techniques based on omics in the identification of biosynthetic pathways related to mycotoxin synthesis.

Nucleic acid-based biosensors: analytical devices for prevention, diagnosis and treatment of diseases / Biosensores basados en ácidos nucleicos: dispositivos analíticos para la prevención, el diagnóstico y tratamiento de enfermedades

BACKGROUND: Biosensing techniques have been the subject of exponentially increasing interest due to their performance advantages such as high selectivity and sensitivity, easy operation, low cost, short analysis time, simple sample preparation, and real-time detection. Biosensors have been developed by integrating the unique specificity of biological reactions and the high sensitivity of physical sensors. Therefore, there has been a broad scope of applications for biosensing techniques, and nowadays, they are ubiquitous in different areas of environmental, healthcare, and food safety. Biosensors have been used for environmental studies, detecting and quantifying pollutants in water, air, and soil. Biosensors also showed great potential for developing analytical tools with countless applications in diagnosing, preventing, and treating diseases, mainly by detecting biomarkers. Biosensors as a medical device can identify nucleic acids, proteins, peptides, metabolites, etc.; these analytes may be biomarkers associated with the disease status. Bacterial food contamination is considered a worldwide public health issue; biosensor-based analytical techniques can identify the presence or absence of pathogenic agents in food. OBJECTIVES: The present review aims to establish state-of-the-art, comprising the recent advances in the use of nucleic acid-based biosensors and their novel application for the detection of nucleic acids. Emphasis will be given to the performance characteristics, advantages, and challenges. Additionally, food safety applications of nucleic acid-based biosensors will be discussed. METHODS: Recent research articles related to nucleic acid-based biosensors, biosensors for detecting nucleic acids, biosensors and food safety, and biosensors in environmental monitoring were reviewed. Also, biosensing platforms associated with the clinical diagnosis and food industry were included. RESULTS: It is possible to appreciate that multiple applications of nucleic acid-based biosensors have been reported in the diagnosis, prevention, and treatment of diseases, as well as to identify foodborne pathogenic bacteria. The use of PNA and aptamers opens the possibility of developing new biometric tools with better analytical properties. CONCLUSIONS: Biosensors could be considered the most important tool for preventing, treating, and monitoring diseases that significantly impact human health. The aptamers have advantages as biorecognition elements due to the structural conformation, hybridization capacity, robustness, stability, and lower costs. It is necessary to implement biosensors in situ to identify analytes with high selectivity and lower detection limits

ANTECEDENTES: Las técnicas de biodetección han sido objeto de un interés cada vez mayor debido a ventajas, tales como alta selectividad y sensibilidad, facilidad de manejo, bajo costo, tiempo de análisis corto, preparación sencilla de muestras y detección en tiempo real. Los biosensores se han desarrollado integrando la especificidad única de las reacciones biológicas y la alta sensibilidad de los sensores físicos. Por lo tanto, las técnicas de biodetección han tenido un amplio campo de aplicación y hoy en día son omnipresentes en diferentes áreas del medio ambiente, la salud y la seguridad alimentaria. Se han utilizado biosensores para estudios ambientales, detectando y cuantificando contaminantes en el agua, el aire y el suelo. Los biosensores también mostraron un gran potencial para desarrollar herramientas analíticas con innumerables aplicaciones en el diagnóstico, prevención y tratamiento de enfermedades, principalmente mediante la detección de biomarcadores. Los biosensores como dispositivo médico pueden utilizarse para identificar ácidos nucleicos, proteínas, péptidos, metabolitos, etc. Estos analitos pueden ser biomarcadores asociados al estado de la enfermedad. La contaminación bacteriana de los alimentos se considera un problema de salud pública mundial; se pueden utilizar técnicas analíticas basadas en biosensores para determinar la presencia o ausencia de agentes patógenos en los alimentos. OBJETIVOS: La presente revisión tiene por objeto establecer los últimos adelantos en la utilización de biosensores basados en ácidos nucleicos y su novedosa aplicación para la detección de ácidos nucleicos. Se hará hincapié en las características del desempeño, las ventajas y los desafíos. Además, se examinarán las aplicaciones de los biosensores basados en ácidos nucleicos para la inocuidad de los alimentos. MÉTODOS: Se examinaron artículos de investigación recientes relacionados con los biosensores a base de ácidos nucleicos, los biosensores para la detección de ácidos nucleicos, los biosensores y la inocuidad de los alimentos, y los biosensores para la vigilancia del medio ambiente. También se incluyeron plataformas de biosensores asociadas al diagnóstico clínico y a la industria alimentaria. RESULTADOS: Es posible apreciar que se han reportado múltiples aplicaciones de biosensores basados en ácido nucleico para el diagnóstico, prevención y tratamiento de enfermedades, así como para identificar bacterias patógenas transmitidas por los alimentos. El uso de PNA y aptámeros abre la posibilidad de desarrollar nuevas herramientas biométricas con mejores propiedades analíticas. CONCLUSIONES: Los biosensores pueden ser considerados como los instrumentos más importantes para la prevención, el tratamiento y la vigilancia de las enfermedades que tienen un impacto significativo en la salud humana. Los aptámeros tienen ventajas como elemento de biorreconocimiento debido a la conformación estructural, capacidad de hibridación, robustez, estabilidad y menores costos. Es necesario implementar biosensores in situ para identificar analitos con alta selectividad y menores límites de detección

Regulación de la actividad enzimática de la NMNAT de Leishmania braziliensis por péptidos representativos de su extremo N-terminal / Regulation of the enzymatic activity of the NMNAT of Leishmania braziliensis by representative peptides derived from its N-terminus end / Regulação da atividade enzimática do NMNAT de Leishmania braziliensis por peptídeos representativos derivados de sua extremidade N-terminal

Resumen El parásito intracelular Leishmania braziliensis es el agente causal de la leishmaniasis cutánea, enfermedad endémica de zonas tropicales, cuyos tratamientos farmacológicos son tóxicos y para la cual no se dispone de una vacuna en la actualidad. Por esta razón, el estudio de las proteínas relacionadas con el metabolismo energético del parásito es relevante dada su importancia para la supervivencia del mismo. En este estudio, utilizando como secuencia plantilla los primeros 18 residuos del extremo N-terminal de la proteína nicotinamida/ nicotinato mononucleótido adenilil transferasa de L. braziliensis (Lb-NMNAT), se sintetizaron péptidos implementando la estrategia Fmoc/ tert-Butilo en una resina Rink amida MBHA. Los péptidos se purificaron por cromatografía en columna C18 y se caracterizaron mediante RP-HPLC. La proteína recombinante 6xHisLb-NMNAT se expresó en células Escherichia coli M15 y se purificó parcialmente empleando cromatografía de afinidad a metales inmovilizados. De esta proteína se confirmó su actividad enzimática a través de ensayos enzimáticos directos analizados por RP-HPLC. Los péptidos sintetizados se utilizaron para evaluar su efecto sobre la actividad enzimática de la proteína 6xHisLb-NMNAT, observándose una modulación diferencial, lo cual resulta promisorio para el diseño de herramientas quimioterapéuticas basadas en la secuencia N-terminal de la proteína Lb-NMNAT.

Abstract The intracellular parasite Leishmania braziliensis is the etiological agent of cutaneous leishmaniasis, an endemic disease in the tropics, whose pharmacological treatments are toxic and for which there is currently no vaccine. For this reason, the study of proteins related to the energy metabolism of the parasite is relevant given its importance for its survival. In this study, based on the first 18 residues of the N-terminal end of the nicotinamide/nicotinate mononucleotide adenylyl transferase protein from L. braziliensis (Lb-NMNAT) as a template, peptides were synthesized implementing the Fmoc/tert-Butyl strategy in a Rink amide MBHA resin. The peptides were purified by C18 column chromatography and characterized by RP-HPLC. The recombinant 6xHisLb-NMNAT protein was expressed in Escherichia coli M15 cells and partially purified using immobilized metal affinity chromatography. The enzymatic activity of the protein was confirmed through direct enzymatic assays analyzed by RP-HPLC. The synthesized peptides were used to evaluate their effect on the enzymatic activity of the 6xHisLb-NMNAT protein, observing a differential modulation, which is promising for the design of chemotherapeutic tools based on the N-terminal sequence of the Lb-NMNAT protein.

Resumo O parasita intracelular Leishmania braziliensis é o agente causador da leishmaniose tegumentar, doença endêmica nos trópicos, cujos tratamentos farmacológicos são tóxicos e para a qual não existe vacina atualmente. Por este motivo, o estudo de proteínas relacionadas ao metabolismo energético do parasita é relevante dada a sua importância para a sua sobrevivência. Neste estudo, usando os primeiros 18 resíduos da extremidade N-terminal da proteína adenilil transferase de nicotinamida/mononucleotídeo nicotinato de L. braziliensis (Lb-NMNAT) como uma sequência modelo, os peptídeos foram sintetizados implementando a estratégia Fmoc/tert-Butil em uma resina Rink amida MBHA. Os peptídeos foram purificados por cromatografia em coluna C18 e caracterizados por RP-HPLC. A proteína recombinante 6xHisLb-NMNAT foi expressa em células de Escherichia coli M15 e parcialmente purificada usando cromatografia de afinidade com metal imobilizado. Desta proteína, sua atividade enzimática foi confirmada por meio de ensaios enzimáticos diretos analisados por RP-HPLC. Os peptídeos sintetizados foram utilizados para avaliar seu efeito na atividade enzimática da proteína 6xHisLb-NMNAT, observando uma modulação diferencial, o que é promissor para o projeto de ferramentas quimioterápicas baseadas na sequência N-terminal da proteína Lb-NMNAT

Obtaining an immunoaffinity monolithic material: poly(GMA-co-EDMA) functionalized with an HPV-derived peptide using a thiol-maleimide reaction.

Metabolites have great potential for the design of biomarkers, since their presence or absence provides valuable information about a biological system. In this context, polyclonal antibodies are important metabolites for diagnostic procedures, but in some pathologies, it has been found that these metabolites are present at low concentrations, so it could be difficult to detect them. In this investigation, an organic monolithic material of poly(GMA-co-EDMA) was functionalized with a peptide via Michael addition (thiol-maleimide) click chemistry. The peptide, covalently bound to the monolith, contains the SPINNTKPHEAR sequence derived from the human papilloma virus L1 protein. It was determined that the obtained monolithic support allows selectively isolating polyclonal antibodies against the SPINNTKPHEAR sequence, since they are retained on the chemical surface of the material by an immunoaffinity interaction. The monolithic material functionalization protocol reported here could be applied to incorporate any peptide with a terminal cysteine in order to recover a specific analyte. A new method was developed for isolating and pre-concentrating antibodies using monolithic materials, which could contribute to the improvement of disease detection strategies based on immunoaffinity interactions.

Designing Chimeric Peptides: A Powerful Tool for Enhancing Antibacterial Activity.

Chimeric peptides containing short sequences derived from bovine Lactoferricin (LfcinB) and Buforin II (BFII) were synthetized using solid-phase peptide synthesis (SPPS) and characterized via reversed-phase liquid chromatography and mass spectrometry. The chimeras were obtained with high purity, demonstrating their synthetic viability. The chimeras' antibacterial activity against Gram-positive and Gram-negative strains was evaluated. Our results showed that all the chimeras exhibited greater antibacterial activity against the evaluated strains than the individual sequences, suggesting that chemical binding of short sequences derived from AMPs significantly increased the antibacterial activity. For each strain, the chimera with the best antibacterial activity exerted a bacteriostatic and/or bactericidal effect, which was dependent on the concentration. It was found that: (i) the antibacterial activity of a chimera is mainly influenced by the linked sequences, the palindromic motif RLLRRLLR being the most relevant one; (ii) the inclusion of a spacer between the short sequences did not significantly affect the chimera's synthesis process; however, it enhanced its antibacterial activity against Gram-negative and Gram-positive strains; on the other hand, (iii) the replacement of Arg with Lys in the LfcinB or BFII sequences improved the chimeras' synthesis process without significantly affecting their antibacterial activity. These results illustrate the great importance of the synthesis of chimeric peptides for the generation of promising antibacterial peptides.

Peptides Derived from (RRWQWRMKKLG)2-K-Ahx Induce Selective Cellular Death in Breast Cancer Cell Lines through Apoptotic Pathway.

The effect on the cytotoxicity against breast cancer cell lines of the substitution of 26Met residue in the sequence of the Bovine Lactoferricin-derived dimeric peptide LfcinB (20-30)2: (20RRWQWRMKKLG30)2-K-Ahx with amino acids of different polarity was evaluated. The process of the synthesis of the LfcinB (20-30)2 analog peptides was similar to the original peptide. The cytotoxic assays showed that some analog peptides exhibited a significant cytotoxic effect against breast cancer cell lines HTB-132 and MCF-7, suggesting that the substitution of the Met with amino acids of a hydrophobic nature drastically enhances its cytotoxicity against HTB-132 and MCF-7 cells, reaching IC50 values up to 6 µM. In addition, these peptides have a selective effect, since they exhibit a lower cytotoxic effect on the non-tumorigenic cell line MCF-12. Interestingly, the cytotoxic effect is fast (90 min) and is maintained for up to 48 h. Additionally, through flow cytometry, it was found that the obtained dimeric peptides generate cell death through the apoptosis pathway and do not compromise the integrity of the cytoplasmic membrane, and there are intrinsic apoptotic events involved. These results show that the obtained peptides are extremely promising molecules for the future development of drugs for use against breast cancer.

Short peptides conjugated to non-peptidic motifs exhibit antibacterial activity.

Short peptides derived from buforin and lactoferricin B were conjugated with other antimicrobial molecules of different chemical natures. The sequences RLLR, RLLRLLR, RWQWRWQWR, and RRWQWR were conjugated at their N-terminal end with non-peptidic molecules such as 6-aminohexanoic acid, ferrocene, caffeic acid, ferulic acid, and oxolinic acid. Peptide conjugates and unmodified peptides were synthesized by means of solid-phase peptide synthesis using the Fmoc/tBu strategy (SPPS-Fmoc/tBu), purified via RP-SPE, and characterized via RP-HPLC and MS. The peptides' antibacterial activity against bacterial strains E. coli ATCC 25922 and S. aureus ATCC 25923 was evaluated, and the results showed that the peptide conjugates exhibited higher antibacterial activity than the original unconjugated peptides. Conjugation of AMPs is a promising strategy for designing and identifying new drugs for treating bacterial infections.

Aminomethylated Calix[4]resorcinarenes as Modifying Agents for Glycidyl Methacrylate (GMA) Rigid Copolymers Surface.

Functionalization of tetrapropylcalix[4]resorcinarene, tetrapentylcalix[4]resorcinarene, tetranonylcalix[4]resorcinarene, and tetra-(4-hydroxyphenyl)calix[4]resorcinarene by means of aminomethylation reactions with the amino acids ß-alanine and l-proline in the presence of aqueous formaldehyde was carried out. When ß-alanine was used, the reaction products were tetrabenzoxazines. The reaction with tetra-(4-hydroxyphenyl)calix[4]resorcinarene did not proceed under the experimental conditions; therefore, l-proline was used, and the corresponding tetra-Mannich base was regio- and diasteroselectively formed. The products were characterized via FT-IR, 1H NMR, 13C NMR, and elemental analysis. With these aminomethylated-calix[4]resorcinarenes, the chemical surface modification of the copolymers poly(GMA-co-EDMA) and poly(BMA-co-EDMA-co-MMA) in a basic medium was studied. The results were quite satisfactory, obtaining the corresponding copolymers functionalized by nucleophilic substitution reaction and ring-opening between the carboxyl group of the upper rim of aliphatic calix[4]resorcinarenes and the hydroxyl group of the lower rim in the aromatic calix[4]resorcinarene and the epoxy group of the glycidyl methacrylate residue of each copolymer. The modified copolymers were characterized via FT-IR, scanning electron microscopy imaging, and elemental analysis. Finally, the modified copolymer surfaces exhibited interaction with peptides, showing their potential application in chromatographic separation techniques such as high-performance liquid chromatography.

Analysis by RP-HPLC and Purification by RP-SPE of the C-Tetra(p-hydroxyphenyl)resorcinolarene Crown and Chair Stereoisomers.

A method for the separation of stereoisomer mixture of the octol C-tetra(p-hydroxyphenyl)calix[4]resorcinarene that was obtained by an acid cyclocondensation reaction between resorcinol and benzaldehyde is reported in this paper. A crude product from octol formation reaction was analyzed by reverse-phase high-performance liquid chromatography (RP-HPLC), and two well-resolved signals corresponding to the crown and chair isomers were found. A reverse phase in solid-phase extraction (RP-SPE) protocol allowed the separation of the two stereoisomers with high purity of each isomer. Finally, the crude and purified stereoisomers were characterized by using FT-IR, 1H-NMR, and 13C-NMR techniques, confirming the chemical identity of the two isomers and the efficiency in the separation process.